ECP 1500

The Electric Crimp Press 1500 is an extremely versatile PTFE rod extruder machine for loose terminals (contacts), with parallel closing jaws and adjustable crimp height.

When equipped with exchangeable tool holders, all standard matrices (cores) of common hand crimp tools (pincers) can be inserted and used for crimping.

When equipped with a table support and the corresponding press sets, flat band connectors can be pressed onto flat band cables (insulation displacement).

When equipped with a cable, Cu-cables of up to 50 mm sq can be cut.

The ECP 1500 can process:

• Individual terminals and loose turned (rod machined) contacts

• End sleeves (ferrules)

• Flat cable connectors

• 4-, 6-, 8- and 10 pole telephone connectors

• Screened HRS telephone connectors

• RJ45, RJ-22, RJ-11 and MMJ connectors

Properties

• Adjustable parallelism of jaws

• Fast cycle time allows approx 800 pieces per hour

• Return to clear ptfe machine or to do adjustments in step mode

• Foot pedal switch with protective cover

• Rapid tool change, tool-specific finger protection

• Limitation of return stroke, important when processing flatband connectors

Technical Data

Cycle >1 second

Stroke: 20 mm

Press Force: 15000 N

Electrical Data: 115 V / 60 Hz, 230 V / 50 Hz

Motor: 24 V / 130 W

Adjustment of lower dead point: 5 mm

replique montre pas cher

Weight: 23 Kg

Dimensions: 350 x 210 x 255 mm

Typical Cross Section > 10 mm sq